Four fire modes: Dividual Fire, Sequential Fire, Salvo Fire and Step Fire.
Programmable: The receiver learns the code of the transmitter with the button "Learn", if the receiver or the transmitter has some problem, it can be replaced with another.
One transmitter can control 12 receivers to the maximum, you can choose how many receivers to be used.The receiver is programmable, it learns the code of the transmitter to number the receivers in sequence. So you can control 432 cues to the maximum, it will be fired from cue 1 to cue 432.
CE/FCC passed
Range: 250m
Cue: 36
Frequency: FSK, 433MHz
Included in the firing system:one BT-36C receiver,one ETX200-12 transmitter, one external battery wire jumper, one LI-Po battery charger.
Receiver Feature:
The BT-36C has four fire modes::
Single mode(Dividual Fire): Fire one cue according to the signal of the transmitter..
Sequence mode(Sequential Fire, Salvo Fire and Step Fire): 0.1 Sec. -4.0 Sec. interval ,ALL,Step:
Press the "0.1-1.0" button of the transmitter,the receiver will fire at a identical time interval 0.1 Sec.-4.0 Sec.
Press the "All" button of the transmitter to fire all cues at the same time.
Press the "Step" button of the transmitter to fire from cue A1 to F6.
The receiver has 36 cues,each cue could fire 6-8 pcs igniters in parallel or 12 pcs igniters in series.
Test Function: The led of cue will turn off if the igniter is connecting well.
Power Supply : You can use internal or external power. (1) Internal power:Li-Po battery,11.1V,5200mAh. (2) External power:DC 12-30V.